Upon the Waves
Upon the Waves
Modern lines mixed with waves.
Black and White colors.
Our wallpaper is the number one self-adhesive wallpaper fabric on the market.
We design and curate all designs.
It's a convenient Peel and stick method. Remove and stick again. We guarantee it will re-stick over and over again, with the understanding that you've followed the installation instructions, and aren't applying our wallpaper to dirty surfaces, or surfaces that aren't recommended for wallpaper use.
The size of our wallpaper options are as follows:
Here's a little more about the details of our product found on the Photo Tex website:
"Photo Tex™ is a peel & stick, multi-US patented, adhesive material made of 100% polyester fabric. It can be installed on almost any surface and remain adhered in all-weather conditions. Its dependable adhesive can be removed and reused multiple times without any alteration or loss of StikAbility™. Photo Tex does not shrink, curl, rip or wrinkle in any climate. Photo Tex can be installed for a day or a decade and upon removal, Photo Tex insures a 99% chance that its adhesive will not leave a sticky residue (see technical bulletins). The fabric material is Class A or 1 fire rated, non-toxic, green and phthalates free."
We advise you wait at least 30 days to adhere our wallpaper to freshly painted walls.
WALL PREP: CLEAN IT.
Use a warm, damp cloth or sponge to clean the wall surface or window and allow it to completely dry.
(This suggestion is for existing walls with probable fingerprints and dirt resulting from day to day foot traffic and use)
Make sure all previous cleaning solutions are completely gone. Outdoors we suggest you use a
pump spray to save time. You can remove and replace the Photo Tex multiple times; however, once the adhesive collects too much dust, dirt or fibers it will become less effective and Photo Tex may not stick as well to your surface.
PEEL & STICK IT
Depending on the size of your Photo Tex, it may be helpful to have two people install it. Try not to let the adhesive come together, or let
Photo Tex fold up against itself. It’s okay if it does, you can separate it by carefully pulling it apart
and you may want two people to do this on larger images.Start at the top of your Photo Tex Image and pull down approximately 4-6” of the backer and crease the back of the backer.
Simply apply the 4-6” of exposed adhesive area to your chosen location. It can be repositioned many times. Once your square then continue to slowly pull the backer downward in 4-6” increments, smoothing the Photo Tex as you go. Depending on the size, it may be helpful if one person pulls down the backer, while the other smooth’s the image on the surface. You can use a plastic dry wall knife (like 6”-8”) to smooth out. If there are any bubbles or wrinkles, you can lightly press or smooth them out, or just peel back that area and re-apply. Please Note: Pressing too hard will not damage the PhotoTex; however, it may cause your hands to
gather ink (Eco-Solvents inks mainly) (due to the natural oils on your hands), and could transfer from your hands onto another surface.